HOWTO: Configure TI or WM emulators

HOWTO: Configure TI or WM emulators

Article ID: Q600001

The information in this article applies to:

Direct I/O, version 4.0, 4.1, 4.2, 4.3, 4.4

SUMMARY

Texas Instruments and White Mountain sell emulator software and hardware for the TMS320C3x DSP. Unfortunately they have no software version for Windows NT.

MORE INFORMATION

To be able to run the 16bit emulator software under Windows NT you have to configure Direct I/O to allow I/O port access to the emulator hardware. The settings are:

Resource	Setting
I/O ports:	[base+000h] - [base+01Fh] [base+400h] - [base+41Fh] [base+800h] - [base+81Fh] [base+C00h] - [base+C1Fh]
Process	NTVDM.EXE (for Direct I/O version 4.0, 4.1) <pathname to the executable> (for Direct I/O version 4.2 and later)

Direct I/O^Ž and Paule^Ž are registrated trademarks of Ingenieurbuero Paule. All other products mentioned are registered trademarks or trademarks of their respective owners.
Questions or problems regarding this web site should be directed to Webmaster. Copyright Š 1998-2008 Ingenieurbuero Paule. All rights reserved. Last modified: 2008-02-18.